Arrow occasionally offers used manufacturing equipment for sale.
The following is a listing of equipment that is currently available.
For additional information, please contact,
Ron Kauzlarich, Vice President of Facilities
Arrow Gear Company
Direction: 630-353-9227
Fax: 630-969-0253
Email: Used_Equip@ArrowGear.com
Machine
Quench Press
Dixi-Tech DQ914 Pneumatic Quench Press with PLC Control, s/n 3307 Asset # H66
- This Quench Press has the same table as a Gleason 36 Press
CAPACITY
- Direct slide table maximum diameter of extension …………………………. 24″
- Maximum diameter of work ………………………………………………………… 36″
- Outside diameter of upper die ……………………………………………………… 37 5/8″
- Outside diameter of lower die ……………………………………………………… 40″
- Distance from bottom of upper die holder to top of lower die holder
- Open ………………………………………………………………………………… 26″
- Closed ………………………………………………………………………………. 11 7/8″
PILOT SPECIFICATIONS
- Diameter of pilot …………………………………………………………………. 3″
- Angle of expander ………………………………………………………………. 20 °
OIL SUPPLY
- Machine capacity …………………………………………………………………….600 gal.
- Optional …………………………………………………………………………………….. 1200 gal.
- Size of oil inlet …………………………………………………………………………. 3″ pipe
- Size of oil outlets ……………………………………………………………………. 5″ pipe
- External oil supply required:
- Gallons per minute ……………………………………………………………. Approx. 120
AIR SUPPLY
- Compressed air pressure required free air per minute ……… Approx. 35 cu. Ft.
- Air receiver tank capacity required …………………………………….40 cu. Ft.
- Air line pressure recommended …………………………………..Approx. 90 lbs. *
- Size of air inlet …………………………………………………………………… ¾”
ELECTRICAL EQUIPMENT
- Pump motor ……………………………………………………….. 15 H.P., 1800 r.p.m.
- Torque motor ………………………………………………….. 400 inch lbs. 600 r.p.m.
MISCELLANEOUS
- Floor space …………………………………………………………………. 5 ½’ X 11′
- Height …………………………………………………………………………… 8 ½’
- Net weight ……………………………………………………………………. 20,800 lbs
- Gross weight for export ……………………………………………. 22,000 lbs
Gleason Testers
Gleason # 13 Tester s/n 16750 asset # T124
- 14 Taper Gear Head and 18 Taper Pinion Head
Gleason # 13 Tester s/n 17709 asset # T135
- 14 Taper Gear Head and 39 Taper Pinion Head
- This Tester Been Rebuilt, but need to be put back together
- New Spindles Bearing with Re-Ground spindles
- 95% Fitted and scrapped in.
Gleason # 502 Tester s/n 634808 asset # T60
- 14 Taper Gear Head and 39 Taper Pinion Head
Inspection Equipment